Nintendo3ds

Nintendo3ds sans les linkers, c'est comme la vie sans le soleil.

  • Accueil
  • > Archives pour novembre 2018

30 novembre 2018

Mise à jour Atmosphère 0.8.0 disponible compatible avec le firmware 6.2.0

Classé dans : Actu,Nintendo Switch — nintendo3ds @ 8 h 19 min

La nouvelle version atmosphère 0.8.0 a été mise en ligne par les  développeur SciresM, elmiroac, naehwert etc.Cette nouvelle version a apporté des nouveautés ,surtout le support pour le dernier firmware 6.2.0 de la console Switch.

DtNSLGkWwAAa3dC.jpg ​

changelog Atmosphère v0.8.0:
0.8.0 is Atmosphère’s seventh official release.

fusee-primary was last updated in: 0.7.0.

The following was changed since the last release:

  • A custom fatal system module was added.
    • This re-implements and extends Nintendo’s fatal module, with the following features:
      • Atmosphère’s fatal does not create error reports.
      • Atmosphère’s fatal draws a custom error screen, showing registers and a backtrace.
      • Atmosphère’s fatal attempts to gather debugging info for all crashes, and not just ones that include info.
      • Atmosphère’s fatal will attempt saving reports to the SD, if a crash report was not generated by creport.
  • Title flag handling was changed to prevent folder clutter.
    • Instead of living in atmosphere/titles/<tid>/%s.flag, flags are now located in atmosphere/titles/<tid>/flags/%s.flag
      • The old format will continue to be supported for some time, but is deprecated.
    • Flags can now be applied to HBL by placing them at atmosphere/flags/hbl_%s.flag.
  • Changes were made to the mitm API, greatly improving caller semantics.
    • sm now informs mitm services of a new session’s process id, enabling custom handling based on title id/process id.
  • smhax is no longer enabled, because it is no longer needed and breaks significant functionality.
    • Users with updated HBL/homebrew should see no observable differences due to this change.
  • Functionality was added implementing basic protections for NAND from userland homebrew:
    • BOOT0 now has write protection for the BCT public key and keyblob regions.
      • The ns sysmodule is no longer allowed to write the BCT public keys; all other processes can.
        • This should prevent system updates from removing AutoRCM.
      • No processes should be allowed to write to the keyblob region.
    • By default, BIS partitions other than BOOT0 are now read-only, and CAL0 is neither readable nor writable.
      • Adding a bis_write flag for a title will allow it to write to BIS.
      • Adding a cal_read flag for a title will allow it to read CAL0.
    • An automatic backup is now made of CAL0 on boot.
      • fs.mitm maintains a file handle to this backup, so userland software cannot read it.
    • To facilitate this, fs.mitm now mitms all sessions for non-system modules; content overriding has been made separate from service interception.
    • Please note: these protections are basic, and sufficiently malicious homebrew can defeat them.
      • Please be careful to only run homebrew software from sources that you trust.
  • Support was added for system version 6.2.0; our thanks to @motezazer for his invaluable help.
    • By default, new keys will automatically be derived without user input.
    • Support is also present for loading new keys from atmosphere/prod.keys or atmosphere/dev.keys
  • General system stability improvements to enhance the user’s experience.

vidéo sur Youtube:

Image de prévisualisation YouTube

SX PRO et licence d’activation SX OS sont en promotion sur Digimaniaz.com,ne ratez pas l’occasion !

28 novembre 2018

Annonce de Xecuter concernant le firmware 6.2

Classé dans : Actu,Nintendo Switch — nintendo3ds @ 6 h 24 min

La team Xecuter vient de mettre un message sur le site officiel qui demande aux utilisateurs du SX OS ne faire pas la mise à jour 6.2 car SX OS ne marche pas sur ce  firmware actuellement .

fw6.2

As with any Nintendo major update, we need some time to complete this process.

We can’t confirm any date yet, but be sure we are doing our best to bring this update as soon as possible.

Meanwhile, do NOT update to 6.2 until we have released our own update that supports it.

 

La team promet que elle va faire de son mieux ,mais ne peut pas donner une date exacte.

SX PRO et licence SX OS sont en promotion pour le Noël sur digimaniaz.com,ne ratez pas cette occasion .

 

20 novembre 2018

Switch:firmware v6.2 disponible qui change tout

Classé dans : Actu,Nintendo Switch — nintendo3ds @ 10 h 19 min

Nintendo a lancé récemment  le nouveau firmware v6.2 pour la console switch.cette mise à jour propose des améliorations  générale de la stabilité du système,mais attention :Le chiffrement du package1 (TSEC firmware NVIDIA, bootloader) a été revu et un nouveau fuse est grillé par cette version.

in-switch-firmware-62-ne-pas-mettre-a-jour-1

 

Donc pour le moment ,des CFW existantes ne fonctionnent pas sur ce nouveau firmware ,y compris le SX OS.

Nous vous conseillons de ne faire pas cette mise à jour et rester sur le firmware actuel .

SX OS licence d’activation et SX PRO sont en promotion sur Digimaniaz.com maintenant .

 

15 novembre 2018

SX Dumper V1.0.0 disponible

Classé dans : Actu,Nintendo Switch — nintendo3ds @ 8 h 33 min

La team Xecuter a dévoilé leur outil SX Dumper v1.0.0,avec ce outil il est  possible de transférer les cartouches au format XCI sur la carte microSD ou sur un disque dur USB pour une lecture avec SX OS.

WAIN100

SX Dumper v1.0.0

  • Dump to .XCI
  • Automatically filenaming (full gamename.xci)
  • USB HDD & microSD Card support
  • Trimmed dumping (removed unused space from backup)
  • Certificate wiping
  • Splitting files for FAT32 filesystem
  • CRC checking dumped image

Téléchargement : SXDUMPER v1.0

 

1 novembre 2018

Homebrew Launcher Menu v3.0.0 pour Switch disponible

Classé dans : Actu,Nintendo Switch — nintendo3ds @ 8 h 49 min

Le logiciel Homebrew Launcher Menu v3.0.0 a été mise en ligne par la team  SwitchBrew,mais pour rappel ,il  n’est disponible que pour les propriétaires de Switch sous firmware 3.0.0.

in-switch-homebrew-launcher-menu-v300-disponible-1

Changelog since v2.0.0:
- Added message boxes. The envGetLastLoadResult() output is now displayed during startup if needed (error returned by the application which ran last).
- Added nxlink support (netloader).
> The Switch IP address can automatically be determined via UDP broadcast.
Netloader is handled on a seperate thread with non-blocking sockets. UI drawing is not blocked during the transfer.
> The transfer can be aborted via ‘Back’ input.
> If the transfer stopped without finishing, the file is deleted.
> When returning to the main-menu from netloader, the menu is reloaded since the netloader NRO may have been deleted due to the transfer stopping.
> Netloader status is displayed in a message-box while netloader is active. This include transfer progress and a progress-bar.
> Fixed buffer overflow vuln with netloader args introduced with the original netloader commit (nothing useful which could cause a crash can be overwritten with an unmodifed nxlink). Fixed unrelated bounds check in launchAddArg() which broke once nxlink_host support was added.
- Use system shared-font. Note that the system language is still not used.
- Added touch-controls.
- Added support for themes loaded from SD. If the system theme is not recognized, the used theme will default to the dark theme.
- Added Theme Menu for selecting the used theme, including the default theme.
- Enabled time display, which uses local-time.
- The battery/charging status is now displayed.
- Added support for file-associations.
Other
- Replaced nanojpeg with libjpeg-turbo. See README regarding this.
- The switch/ directory is created if it doesn’t exist. Config dirs on SD are now automatically created during startup if needed.
- Display an error screen with print-console instead of using fatalSimple, for errors during startup. – Display a message-box in launchFile() for app-launching when an error occurs instead of using fatalSimple.
- Use applet exit-locking.
- Assets are now loaded from a .zip in RomFS instead of embedding it in data/.
- Built with libnx stable v1.5.0.
- Further improvements to overall system stability and other minor adjustments to enhance the user experience.
Hack votre Switch avec SX PRO et SX OS ,disponible sur digimaniaz.com
 

Starkilleur |
Dofushackastucesbots |
Rsgold20 |
Unblog.fr | Créer un blog | Annuaire | Signaler un abus | Télécharger jeux gratuit
| Actujeuxpc
| Game kingdom